TOYOTA LAND CRUISER
FUEL INJECTION CONVERSION
21st
Century Hot Rods provides this guide to show how a carburated six
cylinder Toyota Land Cruiser
can be converted to GM throttle body fuel injection.
The process involves installing the the following systems
- throttle
body and the throttle linkage
- fuel
pump and lines
- four
sensors
- wiring
harness, 3 modules, and the fuel pump relay circuit
- eprom
and ECU
This guide is not
intended to be a step by step manual, but an easy to read and
understand
document that will direct the reader towards a successful conversion.
This guide also provides a good idea as to what will be involved with
such a project before purchasing parts.
Customer support is available via e-mail. A message link is located on
the left bar at the bottom.
We offer parts for this conversion that make it a viable project for
someone who is not an experienced electronics tech, or machinist, but
does have mechanical skills.
We encourage the use of recycled parts, and provide application
information to help with procurement.
We also provide off-the-shelf, as well as cleaned and tested parts for
purchase.
Below are the pages of the guide, formatted to print without distortion
on letter paper.
|
